Skip to content
English
  • There are no suggestions because the search field is empty.

Cleaning Your Card Reader

Keep your PaxCard terminal clean to ensure smooth card payments.

In short: Turn the reader off, pass a cleaning card or a lint-free cloth through the card slot once, repeat until the slot is clear, then turn it back on. Clean it regularly, and straight away if cards are not being read properly.

Who this is for: Employers. UK and Ireland.

Clean the card slot

These steps are for the PaxCard reader used with JustFlex.

  1. Turn the reader off. Always power it off before cleaning to avoid damage.
  2. Use a cleaning card or a lint-free cloth. Insert the cleaning card slowly into the card slot and remove it after one pass.
  3. Repeat if needed. Keep going until the slot is free of dust or debris.
  4. Turn the reader back on.

Clean your reader regularly, especially if you notice cards are not being read properly.

If that did not work

If the reader is faulty, see Returning, Replacing or Moving a Terminal, or contact us at https://help.justtip.net/en/contact-us.

Related

Last checked: 2026-09-23